Security is a reoccurring concern with new and even existing technologies, especially as we draw closer to the Internet of Things (IoT). Benefits like flexibility, energy efficiency, and interoperability are moot if user and provider data is at risk. While most technologies boast enhanced levels of security, what does that mean in a Bluetooth® mesh network?

Security is at the heart of the Bluetooth® mesh networking design, and its use is mandatory with every packet encrypted and authenticated. In most Bluetooth technology applications, you can customize your network security when developing your product, which is common when only a single device connection is used. However, since a Bluetooth mesh network is built on tens, hundreds, or even thousands of devices communicating with one another, security of the entire network requires additional measures and methods.

Multi-Layer Security

Security in Bluetooth® mesh protects your network against various threats and issues on multiple layers. These include replay attacks, which are prevented by judicious use of sequence numbers; man-in-the-middle attacks, which are protected against by using asymmetrical cryptography, such as the Elliptic Curve Diffie-Hellman (ECDH) key agreement protocol, during important procedures; and protection against trash-can attacks from discarded devices by ensuring security keys get refreshed when necessary. 

Bluetooth mesh is the only network topology built around mandatory security keys, which secure the network at multiple layers of the stack. 

  • The device key (DevKey) authorizes you to provision and configure a node so you can add devices to your network
  • Application keys (AppKeys), unique to Bluetooth mesh, allow you to secure messages relating to specific applications, such as lighting, physical security, heating, etc. 
  • Network keys (NetKeys) apply to all messages on the network so that nodes can securely communicate with one another

Blacklisting Potential Threats

If a node is removed from a Bluetooth® mesh network, the device and keys it contains cannot be used to mount an attack. You can add that node to a blacklist, which keeps it from receiving new security keys during a key refresh. As such, a node that was removed from the network, which contains old security keys, is no longer a member of the network; it poses no threat and can’t be used for trashcan attacks.

Security is at the heart of the Bluetooth mesh networking design, and its use is mandatory with every packet encrypted and authenticated.

Redundancies on Multiple Fronts

In a replay attack, eavesdroppers will intercept and capture one or more messages for retransmission later. This can trick the recipient into performing actions from an unauthorized device. A commonly cited example is a car’s keyless entry system that is compromised when the authentication sequence is intercepted and later the message is replayed to gain entry to the car.

To prevent replay attacks, a Bluetooth® mesh network uses two network PDU fields: the sequence number (SEQ) and IV Index. The SEQ value is incremented every time a message is published. A node will discard any message with SEQ value less than or equal to that of the last valid message, as it could relate to a replay attack. Similarly, IV Index values within a message must always be equal to or greater than the last valid message from its source. This security redundancy provides an added level of protection.

Reliable, Secure Connections

The IoT is fast becoming a reality. From beacons to wireless lighting platforms, we are already seeing the initial phases of IoT deployment. The demand for reliable, scalable, and secure wireless connections is paramount to supporting the next evolution of IoT solutions. Only Bluetooth® mesh offers the industrial-grade, government-grade, multi-layer security that the IoT demands.

For an in-depth look at Bluetooth mesh cryptography tools, check out the Bluetooth Mesh Security Overview.

10 Resources That Showcase the Range and Reliability of Bluetooth Technology

Despite the overwhelming adoption of Bluetooth® technology across a wide range of global solutions…

Luminaire Level Lighting Controls and the Future of Healthy Buildings

As we build back from the pandemic, the building industry is rethinking how we…

Bluetooth Low Energy Innovations in Connected Vehicles That You Didn’t Know Of

The automotive industry is evolving at a fast pace. Modern automobiles are far from…

The Role of Lighting in Smart Buildings

Undoubtedly, everyone is aware of two types of lighting, i.e., wired and wireless. It…

Building Automation: Achieving Energy Savings of Over 90 Percent With Smart Lighting Sensors and Bluetooth Mesh

Intelligent sensors are becoming increasingly important in building technology. Modern sensor technology with high-performance…

How STEINEL Saves Energy Costs With Bluetooth Mesh and Turns Lighting Systems Into Smart IoT Backbones

The introduction of the power-saving Bluetooth® Low Energy (LE) standard and the expansion of…

How to Unlock the Full Potential of Networked Lighting Control Systems

A revolution is at hand. Intelligent luminaires are expanding beyond the standard on/off and…

State-Of-The-Art Smart Lighting In A Peace-Of-Mind Package

Retrofitting an energy efficient lighting scheme can involve a lot of upheaval and, with…

Intelligent Light Solutions For The Albrecht Dürer Exhibition

Intelligent light solution for the exhibition of Albrecht Dürer’s precious engravings at Palazzo Sturm,…

DALI Alliance intros new Bluetooth gateway spec for in-building mesh networks

The DALI Alliance, the trade group representing the DALI smart-lighting interface, has released a…

Bluetooth shipments to reach six billion by 2025

Annual shipments of Bluetooth-enabled devices are set to top six billion by 2025, according…

Why Wireless Control Networks Are Taking Over Commercial Lighting

Commercial connected lighting systems have long held the promise of providing building managers with…

Bluetooth® Technology: The Swiss Army Knife of Low-Power Wireless Technologies

Since its inception, Bluetooth® technology has undergone many enhancements and changes that have allowed…

Revealed: New Trends Driving the Future of Bluetooth® Technology

Watch Chuck Sabin, Senior Director, Market Development for the Bluetooth Special Interest Group (SIG),…

2021 Bluetooth Market Update

Supported by updated forecasts from ABI Research and insights from several other analyst firms, the Bluetooth Market Update highlights the latest Bluetooth trends and forecasts.

Intelligent Light solutions for the Albrecht Dürer Exhibition

Today, we are living in a world where smart is the new normal, and…

Bluetooth Mesh: A Healthier Wireless Option

At some point in the near future, nearly every object in the home or…

Understanding Reliability in Bluetooth® Technology

Download this detailed discussion of the issues and factors that impact the reliability of…

Bluetooth Mesh Networking Highlights and Features

This white paper provides an overview of the Bluetooth Mesh Profile and highlights some…

How to Deploy BlueZ on a Raspberry Pi Board as a Bluetooth Mesh Provisioner

This step-by-step study guide will teach you: How to rebuild the kernel on a…

2020 Bluetooth Market Update

Supported by updated forecasts from ABI Research and insights from several other analyst firms, the Bluetooth Market Update highlights the latest Bluetooth trends and forecasts.

How to Make Wearables Bluetooth Mesh Provisioners

Learn how to create applications for smartwatches and other platforms that can monitor and control nodes in a Bluetooth mesh network.

2019 Bluetooth Market Update

Supported by updated forecasts from ABI Research and insights from several other analyst firms, the Bluetooth Market Update highlights the latest Bluetooth trends and forecasts.

Lighting as a Platform

See how connected lighting systems are being used as a platform to enable advanced building services like wayfinding, asset tracking, and space utilization to improve the ROI of smart building investments.

An Introduction to the Bluetooth Mesh Proxy Function

Learn how to create applications for smartphones and other platforms which can monitor and control nodes in a Bluetooth mesh network.

Build a Smarter Building with Blue

See how Bluetooth increases reliability, reduces costs, and enhances your smart building ROI.

Overview – Bluetooth Mesh Networking

A quick overview outlining how Bluetooth mesh uniquely meets the reliability, scalability, and security requirements of commerical and industrial markets.

 Get Help