In my previous article on Bluetooth Mesh and DALI – the Perfect Match, we examined the history and benefits of a Bluetooth® mesh and DALI partnership. Now, let’s take a closer look under the hood of the integration to see how Bluetooth mesh and DALI connect.

To explain how Bluetooth mesh connects to DALI, the brand owned by the Digital Illumination Interface Alliance, our starting point will be a luminaire, such as the troffer in your office ceiling, a linear suspended type, or any other type. Internally, despite different form factors, they are all very similar, consisting of a light source (LEDs) and a driver (provides power to LEDs). Very often, luminaires also have occupancy and light level sensors built in. Traditionally, the sensor was controlling the driver over an analog line (0-10V line). At 0V the driver was dimmed to off, at 10V it was at full power, and any voltage in the middle was (approximately) translating to the dim level – e.g., 4V was dimming the driver down to about 40%. This was in the analog world.

Lighting Goes Digital

With the arrival of Bluetooth® mesh networking, the sensors have become mesh enabled. The sensor device, which typically included occupancy and ambient light level sensors, could now also include a microprocessor and a Bluetooth radio (often as an integrated SoC – System on Chip). And, instead of blindly controlling the driver, the sensor could start exchanging the information over the mesh network – publishing its own data and subscribing to other sensors. Strictly speaking, in a Bluetooth mesh network, a sensor cannot subscribe to another sensor as it has no means to deal with the received data.

This is where the most powerful weapon in the Bluetooth Mesh Model arsenal – the lighting controller (LC) – comes into play. The LC is a piece of software which is designed to run on the microprocessor (or the SoC) inside a sensor, transforming a dumb sensor into an intelligent sensor-equipped lighting controller.

Thanks to miniaturization, the device still looks like a sensor but is way more powerful. It is able to drive complete lighting control strategies, such as occupancy, vacancy, or daylight harvesting. What is more, it behaves like a cell in an intelligent organism – coordinating the actions with neighboring lights to achieve fully synchronized action. All that without any central controller as is typical with previous generations of networked lighting systems. The legacy control box is gone – the distributed controllers embedded in luminaire sensors transform a network of luminaires into a collectively intelligent lighting system; a system with no single point of failure as each luminaire is fully autonomous yet perfectly synchronized with the others.

Digital DALI Bus

Now in the digital world, enabled by DALI, the 0-10V control line between the sensor controller and the driver is replaced by a digital bus. This bus is very simple – just two ordinary wires. First of all, this two-wire bus provides both communications and power, so the sensor does not need any external power source; we say it is powered by the DALI bus. Secondly, the communication over the DALI bus is digital, leaving no room for approximation. There is no longer an approximation of about 40 percent. It is precisely 40 percent (or any other dim level required). A comparable difference is like that between an analog vinyl record and a compact disc – precision. And thirdly, DALI supports not only control commands, but it also supports queries, which can report back some data – this was impossible in the analog world. Strictly speaking, the Bluetooth® mesh device – with all its networking, sensing, and control functions – becomes (using the DALI terminology) an intra-luminaire application controller.

Modern DALI drivers (known as D4i drivers) collect a lot of data. Thanks to bi-directional digital communication over the DALI bus, all this data can be collected and made available to the Bluetooth network for further processing and analysis.

For a deeper dive into using Bluetooth® mesh as the inter-luminaire system for lighting control and management, check out: Building a Sensor-Driven Lighting Control System Based on Bluetooth® Mesh.

FEATURED DOWNLOAD

Bluetooth Mesh Models – A Technical Overview

This detailed technical paper provides a guided tour of the Bluetooth mesh models, taking an in-depth look at the building blocks critical to Bluetooth mesh interoperability.

INSTANT DOWNLOAD

10 Resources That Showcase the Range and Reliability of Bluetooth Technology

Despite the overwhelming adoption of Bluetooth® technology across a wide range of global solutions…

Luminaire Level Lighting Controls and the Future of Healthy Buildings

As we build back from the pandemic, the building industry is rethinking how we…

Bluetooth Low Energy Innovations in Connected Vehicles That You Didn’t Know Of

The automotive industry is evolving at a fast pace. Modern automobiles are far from…

The Role of Lighting in Smart Buildings

Undoubtedly, everyone is aware of two types of lighting, i.e., wired and wireless. It…

Building Automation: Achieving Energy Savings of Over 90 Percent With Smart Lighting Sensors and Bluetooth Mesh

Intelligent sensors are becoming increasingly important in building technology. Modern sensor technology with high-performance…

How STEINEL Saves Energy Costs With Bluetooth Mesh and Turns Lighting Systems Into Smart IoT Backbones

The introduction of the power-saving Bluetooth® Low Energy (LE) standard and the expansion of…

How to Unlock the Full Potential of Networked Lighting Control Systems

A revolution is at hand. Intelligent luminaires are expanding beyond the standard on/off and…

State-Of-The-Art Smart Lighting In A Peace-Of-Mind Package

Retrofitting an energy efficient lighting scheme can involve a lot of upheaval and, with…

Intelligent Light Solutions For The Albrecht Dürer Exhibition

Intelligent light solution for the exhibition of Albrecht Dürer’s precious engravings at Palazzo Sturm,…

DALI Alliance intros new Bluetooth gateway spec for in-building mesh networks

The DALI Alliance, the trade group representing the DALI smart-lighting interface, has released a…

Bluetooth shipments to reach six billion by 2025

Annual shipments of Bluetooth-enabled devices are set to top six billion by 2025, according…

Why Wireless Control Networks Are Taking Over Commercial Lighting

Commercial connected lighting systems have long held the promise of providing building managers with…

Bluetooth® Technology: The Swiss Army Knife of Low-Power Wireless Technologies

Since its inception, Bluetooth® technology has undergone many enhancements and changes that have allowed…

Revealed: New Trends Driving the Future of Bluetooth® Technology

Watch Chuck Sabin, Senior Director, Market Development for the Bluetooth Special Interest Group (SIG),…

2021 Bluetooth Market Update

Supported by updated forecasts from ABI Research and insights from several other analyst firms, the Bluetooth Market Update highlights the latest Bluetooth trends and forecasts.

Intelligent Light solutions for the Albrecht Dürer Exhibition

Today, we are living in a world where smart is the new normal, and…

How Bluetooth® Technology is Enabling Safe Return Strategies in a COVID-19 Era

This report shares insight into how Bluetooth® technology is being leveraged by organizations of all sizes to…

Bluetooth Mesh: A Healthier Wireless Option

At some point in the near future, nearly every object in the home or…

How Wireless Technology Is Enabling the Adoption of Commercial Connected Lighting

This report on commercial connected lighting systems developed by Guidehouse Insights analysts shares perspectives…

Understanding Reliability in Bluetooth® Technology

Download this detailed discussion of the issues and factors that impact the reliability of…

Bluetooth Mesh Networking Highlights and Features

This white paper provides an overview of the Bluetooth Mesh Profile and highlights some…

How to Deploy BlueZ on a Raspberry Pi Board as a Bluetooth Mesh Provisioner

This step-by-step study guide will teach you: How to rebuild the kernel on a…

How to Make Wearables Bluetooth Mesh Provisioners

Learn how to create applications for smartwatches and other platforms that can monitor and control nodes in a Bluetooth mesh network.

Lighting as a Platform

See how connected lighting systems are being used as a platform to enable advanced building services like wayfinding, asset tracking, and space utilization to improve the ROI of smart building investments.

An Introduction to the Bluetooth Mesh Proxy Function

Learn how to create applications for smartphones and other platforms which can monitor and control nodes in a Bluetooth mesh network.

Build a Smarter Building with Blue

See how Bluetooth increases reliability, reduces costs, and enhances your smart building ROI.

Overview – Bluetooth Mesh Networking

A quick overview outlining how Bluetooth mesh uniquely meets the reliability, scalability, and security requirements of commerical and industrial markets.

 Get Help