In a truly smart building, lights can be much more than just lights. These buildings are supported by lighting systems that have the potential to act as a distributed network of small computers and are capable of hosting all sorts of other applications, enabling the creation of true smart building services. Inherent interoperability, fundamental device behaviour models, and value-added capabilities are all critical to making the concept of the true smart building a reality.

In part 1, we explored the concept of lighting as a platform and its capability to support multiple building services, from lighting automation to way finding and asset tracking. In this article, we’ll discuss some of the critical requirements needed for designing a connected lighting platform capable of supporting a smart building.

True Multi-Vendor Interoperability

Smart lighting systems only work seamlessly when the components of those systems — lamps, switches, controllers, and sensors — connect and communicate with each other. This can only happen if those components adopt and adhere to a common technical standard.

For true multi-vendor interoperability, you need a technology that defines everything across all layers of a full protocol stack, from the low-level technicalities of radio communication up to the application-layer behaviours relating to particular types of products. This way you’re assured that products adopting this technology will work together. Their radios will take the same approach to encoding and transmitting digital information over an analogue, radio medium and use the right frequencies and timing rules. Dimmer switches will send wireless messages meaning reduce your lightness level by this amount, which luminaires will understand and respond to.

Multi-vendor interoperability is not something to take for granted, as it doesn’t happen by magic. It’s possible only because of the rigorous and comprehensive specification and testing procedures provided and mandated by global standards organizations, such as the Bluetooth Special Interest Group (SIG).

The Magic of Models

Models are standard software components inside devices which act as the fundamental, behavioural building blocks of a device. It falls to certain models to define how a switch can turn a light on or off. Other models define how the lightness transitions triggered by occupancy changes should behave. The Bluetooth® mesh specification currently includes collections of models which can be used by any type of device in general (called generics), models which are defined specifically for lighting-related devices, models concerned with scenes, and models concerned with the propagation of accurate time information across the network. Scenes make possible more advanced automation scenarios involving groupings of different types of device, usually belonging to entirely different building systems, like lighting, heating, and air conditioning.

The collection of models that a device incorporates determines what that device can do and how other devices can interact with it. Figure 1 depicts the models which we might find in light switches, lights, and associated sensors. The Generic ON/OFF Client model allows the switch to give orders to the light by sending defined messages to it or to find out its current state. The Generic ON/OFF Server model allows the light to respond to the switch’s messages.

The Light Lightness Server model allows brightness control and the Light HSL (Hue/Saturation/Lightness) model allows colour control.

The Light LC Server model is where things start to get really interesting. LC stands for Lighting Control and it’s this model which works in conjunction with the Sensor Model inside sensors, such as occupancy and ambient-light sensors, to implement the occupancy and daylight-saving behaviours that were described in part 1.

Figure 1 – Models potentially found in switches, lights, and sensors.

Models define the behaviour of devices on a network and are critical to creating smart lighting systems. Facilities that use lighting as a wireless platform will be better positioned to support automation and create a truly smart building.

Bluetooth Technology as a Platform for Smart Buildings

For years, Bluetooth® technology has been the global standard for reliable, secure wireless connectivity. Now, with the capability to create large-scale, smart lighting networks, your lighting system can double as a wireless platform and support a range of building services. A smart lighting system built on a Bluetooth mesh network offers inherent interoperability and a full-stack approach synonymous with Bluetooth technology, providing everything you need to create a truly smart building.

To learn more about how Bluetooth mesh is disrupting building automation, wireless sensor networks, asset tracking, and more, watch this on-demand webinar.

FEATURED DOWNLOAD

Bluetooth Mesh Networking: Paving the Way for Smart Lighting

Bluetooth mesh networking brings the multi-vendor interoperability, low power, and low latency pedigree of Bluetooth Low Energy to the world of commercial lighting. Discover how this innovative technology can turn wireless connectivity into a smart lighting wireless platform.

INSTANT DOWNLOAD

Luminaire Level Lighting Controls and the Future of Healthy Buildings

As we build back from the pandemic, the building industry is rethinking how we…

The Role of Lighting in Smart Buildings

Undoubtedly, everyone is aware of two types of lighting, i.e., wired and wireless. It…

Building Automation: Achieving Energy Savings of Over 90 Percent With Smart Lighting Sensors and Bluetooth Mesh

Intelligent sensors are becoming increasingly important in building technology. Modern sensor technology with high-performance…

How STEINEL Saves Energy Costs With Bluetooth Mesh and Turns Lighting Systems Into Smart IoT Backbones

The introduction of the power-saving Bluetooth® Low Energy (LE) standard and the expansion of…

How to Unlock the Full Potential of Networked Lighting Control Systems

A revolution is at hand. Intelligent luminaires are expanding beyond the standard on/off and…

State-Of-The-Art Smart Lighting In A Peace-Of-Mind Package

Retrofitting an energy efficient lighting scheme can involve a lot of upheaval and, with…

Intelligent Light Solutions For The Albrecht Dürer Exhibition

Intelligent light solution for the exhibition of Albrecht Dürer’s precious engravings at Palazzo Sturm,…

Gebäudeautomatisierung mit smarter Beleuchtungssensorik und Bluetooth mesh

Intelligente Sensoren werden in der Gebäudetechnik immer bedeutender. Moderne Sensortechnik mit hochleistungsfähigen Kommunikationsknotenpunkten kann…

DALI Alliance intros new Bluetooth gateway spec for in-building mesh networks

The DALI Alliance, the trade group representing the DALI smart-lighting interface, has released a…

Bluetooth shipments to reach six billion by 2025

Annual shipments of Bluetooth-enabled devices are set to top six billion by 2025, according…

Why Wireless Control Networks Are Taking Over Commercial Lighting

Commercial connected lighting systems have long held the promise of providing building managers with…

Analysts Predict Bluetooth Commercial Connected Lighting Will Gain Mainstream Traction

Commercial connected lighting systems are becoming the central nervous system for buildings, providing building…

Revealed: New Trends Driving the Future of Bluetooth® Technology

Watch Chuck Sabin, Senior Director, Market Development for the Bluetooth Special Interest Group (SIG),…

Bluetooth Mesh at Scale - A Case Study

This session includes a detailed overview of the largest Bluetooth mesh lighting control installation…

2021 Bluetooth Market Update

Supported by updated forecasts from ABI Research and insights from several other analyst firms, the Bluetooth Market Update highlights the latest Bluetooth trends and forecasts.

Intelligent Light solutions for the Albrecht Dürer Exhibition

Today, we are living in a world where smart is the new normal, and…

How Bluetooth® Technology is Enabling Safe Return Strategies in a COVID-19 Era

This report shares insight into how Bluetooth® technology is being leveraged by organizations of all sizes to…

How Wireless Technology Is Enabling the Adoption of Commercial Connected Lighting

This report on commercial connected lighting systems developed by Guidehouse Insights analysts shares perspectives…

Understanding Reliability in Bluetooth® Technology

Download this detailed discussion of the issues and factors that impact the reliability of…

Bluetooth Mesh Networking Highlights and Features

This white paper provides an overview of the Bluetooth Mesh Profile and highlights some…

Bluetooth Mesh for Industrial IoT

Bluetooth Mesh lays a framework for large-scale industrial deployments using technology that is already…

Everything You wanted To Know About Wireless Communication In Lighting. Part 2: Data Rate

This is the second part of our guide on wireless communication in lighting. Today, we’ll…

Lighting as a Platform

See how connected lighting systems are being used as a platform to enable advanced building services like wayfinding, asset tracking, and space utilization to improve the ROI of smart building investments.

Build a Smarter Building with Blue

See how Bluetooth increases reliability, reduces costs, and enhances your smart building ROI.

 Get Help